Installed: More Epoxy Coatings at Annapolis Volvo (Annapolis, Anne Arundel County), Maryland.
Write Up and Delivery Get Epoxy Coatings Makeover
In 2014, our Baltimore operations returned on two occasions to install more commercial epoxy coatings in the two drive-thru areas of Annapolis Volvo. These areas are used as the Admittance (Service Write-Up Area) and Delivery (Customer Pick-Up Area).
Since the staff at the dealership was already familiar with our commercial coatings, they already knew what they wanted for each of these 800+ square foot areas. When Dave showed up, it was basically to assist them with color selection: our Decorative Chip coatings – our York blend.
Another 1,600 Square Foot Face-lift
Jason and his crews again used our planetary grinders to prepare each of the drive-thru areas (each was a little over 800 square feet). Using the metal bonded diamond tooling, they ground the concrete surface to a CSP 2 surface profile. All cracks and surface imperfections in the area were repaired using our epoxy crack fillers.
A self-priming coat of high solids, Camel pigmented epoxy was applied (10 MILS WFT) and broadcast to saturation with the York 1/4″ blend of acrylic chips. The following day, after scraping and vacuuming the excess chips, the crews applied our polyaspartic topcoat (9 MILS WFT) – the same used in our residential garage coatings. This clear, fast curing polymer hardens so quickly that Annapolis Volvo returned the areas to service the next day.